Permanent magnetic brushless motor
System can work in four settings:
1. AC 220V - Most reliable source of energy and stable pressure water flow.
2. DC with solar panels and back up batteries - The system will work and will charge the batteries as long as there is sufficient solar energy, and the size of your batteries.
3. DC with solar panels only (no batteries) - Most economic, just requires solar panels. Will operate the pumps directly without any need for batteries or AC power, or additional controller. The system will work as long as there is solar power, when sunlight decreases, the water flow will decrease.
4. AC/DC - In this option, both power supplies are connected to the pump. Pump will work on solar at default. If solar power runs out or sunlight decreases, pump will automatically switch to AC. This process of switching from solar to AC may take up to an hour until voltage has dropped very low. During this time the water pressure will drop.
If using for domestic use- (on/off multiple times), you will need to use a water pressure tank and a water pressure controller.
Controller can be connected to water tank with the right sensors, and will automatically work when tank is low and stop when tank is full.
If needing to change RPM press 'ENTER' & 'SET' to reach P01, Press ENTER and use the 'up and 'down' arrows to selected the required RPM. (Note: if using DC without batteries, and there is not enough solar power, it will not reach the High RPM chosen)
Rated power: 2200W (3HP)
Max. Flow rate: 60,000L/H
Max. Head: 27m
RPM: 1000-3000rpm
Inlet & outlet diameter: 3 inch
Pump enclosed in steel frame
MPPT Controller included
* Solar panels and batteries not included
* Ask for freight quote